Quote:
Originally Posted by cycleguy55
With my West Coast Cobra I was able to mount an LED strip on the bottom surface of the full-width roll bar. It's effective and relatively hard to see unless you're looking for it.
|
You can see it here:
http://www.clubcobra.com/forums/pict...ictureid=18164
I don't have a photo of it lit up, but suffice to say it's quite visible.
This the LED strip I used:
https://www.princessauto.com/en/deta...ip/A-p8493074e
I tried a number of different ways to attach the strip, and had no end of frustration finding something that would bond to the material used for the LED strip. What finally worked was clear hot melt glue. It's been there for 4+ years now and still holding.