Thread: Hi.
View Single Post
  #206 (permalink)  
Old 04-09-2019, 11:46 PM
COBRANIP COBRANIP is offline
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Feb 2008
Location: Jacksonville, FL
Cobra Make, Engine: VSE alum. frame, FFR carbonfiber body (under construction)
Posts: 293
Not Ranked     
Default
Hey, it's been a while since I've been on the site but enjoy your up dates and experiments.
At one point you were looking at suspension settings and thought I would pass on what Matt A. told me: Caster: 2 to 3 degrees positive (seems like too little to me!); Camber: 1 Degree; Toe: 1/16" Ride Height: 4-1/2" to 5" front and 1" higher in the rear.

Also , if you are interested I know how to reduce the unsprung weight of the front suspension by about 7 lbs per side (if you are interested in this I would prefer you email me).
Really enjoy your updates!
Reply With Quote