[Whodeeny]

Originally Posted by spdbrake

From what I can see the swivel on the 90 hose end appears wet.
Also that look like a AN -10 hose to 90 then integral 1/2npt end.
Like this https://www.summitracing.com/parts/e...0erl/overview/

You want to try a different hose end setup. Like a straight 90 -10 AN like this
https://www.summitracing.com/parts/vpe-21910/overview/

To a -10AN to 1/2"NPT. like this
https://www.summitracing.com/parts/e...0erl/overview/

My initial thought was the hose fittings also but now I don't think the leak is coming from the hose. It appears to me to be coming from the flange area where the gasket is or one of the bolt holes. The threads around the hose fittings are not wet with oil but the flange area is.