Not Ranked
Just did a re read of the link on ballast resistors and Durasparks . It said the standard Ford E coil has a resistance of 0.5 ohms and .14 ohms is needed . Also said further down to just add a .85 ohm resistor . My math says 0.5 and .85 = 1.35 ohms , not .14ohms .... slipped decimal place maybe ?
Unfortunately my meter`s lowest scale is 200 ohms , so measuring 1.4 or .5 is really suspect to me .
Anyway , I have the blue module and the guy who did the distributor said no resistor is needed , Guess I`ll find out .
|