Quote:
Originally Posted by CJ428CJ
When you reinstall the side pipes, be sure to use a little teflon thread sealant so you're less likely to have the same problem next time. Also, the header bolt shown in your picture uses a 7/16" wrench. Switch to bolts that have a 3/8" head (ARP makes them). That will allow you to use a box end wrench rather than an open end wrench.
|
I can't check my car because it's in a bag for winter storage but I'm pretty sure I have the 3/8" ARP bolts and don't have a problem getting a box end wrench on any of them, so this is good advice.