View Single Post
  #15 (permalink)  
Old 02-21-2020, 05:53 PM
crazycasey crazycasey is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jan 2020
Location: Cotati, CA
Cobra Make, Engine:
Posts: 11
Not Ranked     
Default

Quote:
Originally Posted by razerwire View Post
Yes, I lightly oil them and have washed them. Four dealers in States now. Part number JC70/JC71
Do you run the bases with a grommet like the picture I posted, or do you bolt them to the velocity stack hold-down/jet well location? I ask because I only have 1 of clearance over the stacks at my tightest spot, and I know ITGs want a 3/4 gap between the stack and the inside of the filter. If I set them where they want to be, the bases are going to be sitting right on top of the jet well screens. If I bolt the bases to the carb bodies, Im going to be a little tight on the clearance to the inside of the filter (about 5/8 according to the dimensions published online).

Thanks for your help!
Reply With Quote