Quote:
Originally Posted by Bill D
“ As Igofastr's stated, I don't think it even matters that the PCV system has the original components. So a vacuum port from a carb's base to a valve cover would probably be sufficient.”
Webers don’t have a port to which a hose can be connected. That’s my whole issue.
|
I would be happy to sell you a set of spacers, each with a port and hoses to connect to a PCV. It worked when I took my weber-equipped GT40 through. I also have a cheap Chinese valve cover with a PCV attached. This setup got my 351W with weber IDA48s through the inspection.
Ron