Hello,
Thanks all for the
oil pan gasket recommendations-
I'm now getting ready to replace the intake manifold gaskets.
Which is the recommended gasket to go with on the Roush 351W motors? (427R, vic jr intake)
I'm looking at the Edelbrock 7219 or Fel-pro 1262S3
I also see one mention of Edelbrock 7220 gaskets..
Would these be a good match to the roush heads and Vic jr intake?
I was reading an old thread about the roush motors using an improper intake gasket as-built from the factory.
Thanks!
-Dave