Not Ranked
Glad to hear camber plates are an improvement. I tried to install mine earlier this week, but realized I needed to order camber nuts to fit the KYBs, so I’ll have to wait until next week when they get here to install. My drivers side has about 2.6 degrees of negative camber as opposed to around -1 on the passenger side. I’ve read where lowering the ride height will bring it in to spec, but I’m already down to about 1” clearance. Plus I figure the plates will let me play with negative settings on both sides.
BTW, our configuration requires E46 camber plates, not E36, if you are not purchasing from Backdraft.
Last edited by Quentin Z; 06-05-2020 at 05:17 PM..
|