Thread: Springs and ride height
View Single Post
  #8 (permalink)  
Old 09-12-2020, 01:03 PM
Lightingrod's Avatar
Lightingrod Lightingrod is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jun 2005
Location: Belleville, 15 miles East of St Louis MO, IL
Cobra Make, Engine: Classic 427, I purchased it May 2005, the kit was bought in 1991. I'm not sure when it was completed! Installed GMPP Connect & Cruise 376/525 with T-56 S/M 3.55 gears about 2 years ago! 1/4 miles is with old setup!
Posts: 281
Not Ranked     
Default
I got a question in the same area. I purchased the coil-over suspense setup from CR-II in 2006 (I think), kit is from 1991! When I installed the coil-overs it had 355 SBC iron heads/block and 700R-4. The ride and handling was good! Later went to SBC 388 with aluminum heads, still good! Awhile back I went to all aluminum LS-3 and T-56 S/M, the front is a bit higher but really STIFF!

I seem to remember the coil-overs were QA1? The shocks and front springs are not-adjustable. Anyone have any information on the coil-over kits from that time period?

Thanks, Al
__________________
Al
I want to do right, Just not right NOW!
Reply With Quote