Not Ranked
Well after some investigation I found what seems to be the issue. The mouth opening where the radiator sits in between is closer to one side, which is the drivers side. It’s hitting the bumper support and won’t move over because of the contact. If I center up the radiator opening between the bumper supports then the fenders are way off, at least an inch or more. Also the bumper brackets won’t be in the proper location as well. The fiber glass looks to be warped on both sides of the opening where radiator fits between. I might have to do some cutting and fiber glass work to get it right. Here are a few pictures of what I’m trying to explain. Let me know your thoughts.
|