08-08-2021, 04:35 PM
|
|
CC Member
|
|
|
Join Date: Mar 2008
Cobra Make, Engine: currently Cobra-less
Posts: 576
|
|
Not Ranked
Quote:
Originally Posted by Unique427
The stalk switch assembly should have a distinct detent when going
high to low (or back to high) and the lever moves and stays in that position.
There's a contact at the base of the stalk that's closed for high beam
and open for low beam. If there's no positive detent keeping the
stalk switch in the low beam position, what could be happening is
you're pulling the lever, and by force alone opening the contact,
switching to low beam. But, upon releasing the lever is moves
back to high beam position closing the contact.
If so, this is a faulty switch assembly. It's a LUCAS 119SA
|
That is exactly what is happening, there is no detent when pulling the lever towards me.
__________________
when in doubt, floor it
|