View Single Post
  #27 (permalink)  
Old 10-13-2021, 04:47 PM
splenderleith splenderleith is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2021
Cobra Make, Engine:
Posts: 16
Not Ranked     
Default

Thanks for all of the help this far. I am sure I wouldn’t have gotten this far without it. Diagnosis spot-on Gary.

I put the plugs back in, cranked it and saw the head move. With some very light prying pressure, it seems to move a little on the intake side. However, I can’t get much more than that. I am wondering if I might be missing something. I can’t get the exhaust side of the head to budge, even the slightest bit.

Valve covers removed, intake manifold removed, headers removed, rocker arms and push rods removed (rocker arm studs and 6 of the valves still in place), 10 head bolts removed, spark plugs removed.

There are 3 large Allen head screws/plugs in the head, between the valves, which I assume are something to do with the machining process. I haven’t messed with them. Does it seem like I missed some fastening device?
Reply With Quote