View Single Post
  #74 (permalink)  
Old 12-11-2021, 07:05 AM
markantioch markantioch is offline
CC Member
Visit my Photo Gallery

 
Join Date: Aug 2021
Location: Beaumont, TX
Cobra Make, Engine: Classic Roadsters, Ford coyote Gen1
Posts: 72
Not Ranked     
Default

They (Dave) said no on the lowers. They do not have a jig to fabricate one that's 3" shorter. I would have to modify it on my own. Dave also stated that all adjustable uppers; and lowers would move your center point one way or another. Lowers moving your axle forward or back, and the uppers moving your axle right or left to center is, and tilting it forward or back to adjust your pinion angle.
I was told to try it out at no loss to me, that I could send the kit back. Was advised to remove my coils and move the axle up and down its travel path (compression 3") and see if I have any bindings after pinion setting, that I should hear, and feel it. Then take it for a test ride after reinstalling the coils.
Parts should be here early this coming week I was told. A hydraulic lift would be a sweet thing to have for this job.
That's my gameplan in a nut shell.
__________________
Mark
Reply With Quote