[NealM]

I'm looking into cams for a 347 w/ 10:2 compression.
Trickflow heads, port matched
Weber 48 IDFs

I'm thinking about this roller cam setup

Advertised Duration (Degrees): 286 intake/294 exhaust
Duration at .050 in. Lift (Degrees): 224 intake/232 exhaust
Camshaft Lift: .339 in. intake/.352 in. exhaust
Valve Lift with 1.6 Rocker Arms: .542 in. intake/.563 in. exhaust

Any comments? What cams are you using?