[ERA 626]

After reading this thread I was wondering about the cam that I purchaced.
I don't know much about cams and I desire the;

"Motor should idle at 750 - 850 RPM with a nice rumpeta-rumpeta lope, and pull like a diesel from off-idle - up".


Here is the info on my cam;
Ultradyne Cam

intake/exhaust

Duration @.050 221 / 221
lobe lift .3027/.3027
lobe seperation 110 degrees
seat duration @ .020 276/276
gross valve lift .533/.533


This is the cam I have but I could easily return it, does this cam profile look good??
I have a 428 FE with a factory FOMOCO 2X4 intake, Holly 570cfm bj/bk carbs, with edelbrock aluminum heads & roller rockers.
Thanks,
Mike