View Single Post
  #83 (permalink)  
Old 10-30-2002, 01:32 PM
Mr.Fixit's Avatar
Mr.Fixit Mr.Fixit is offline
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2002
Location: so cal, Cal
Cobra Make, Engine: I used to fix them for a living
Posts: 2,563
Not Ranked     
Default

The response from REDLINE oil's tech support:


We don't recommend seating the rings with the Red Line oils as they
can impede the seating process. Some synthetics and petroleums don't
seem to have the same issues. I would just recommend seating the
rings with a petroleum oil and then switch over to the Red Line, if
you are breaking it in on the track rather than the dyno.

In the past it was thought that a non-detergent oil would allow the
rings to seat little quicker than a detergent petroleum oil. I am not
sure how much difference the non-detergent oil makes with most ring
material and suitable cylinder wall preparation. At this point a
non-detergent petroleum oil is going to be fairly difficult to find.

Regards, Dave
Red Line Oil
__________________
In a fit of 16 year old genius, I looked down through the carb while cranking it to see if fuel was flowing, and it was. Flowing straight up in a vapor cloud, around my head, on fire.
Reply With Quote