Not Ranked
Gary,
We've got another customer in Maryland we did a Cobra for, Dave....darn to long ago. I'll try to find his number and pass it on. I know he registered his without to much of a headache.
As far as the panhard bar goes, easy enough to make one. Just be carefull with the geometry. Two 5/8's Heim joints, with a 5/8's shaft, and a 1/2" piece of seamless pipe. cut the pipe to length and tap out. Weld or bolt on two 90- deg. flanges, bolt in place. That's it. (we do this for our streetrods)
Let me know if you do it, and how it works!
DV
|