[rdorman]

Rick, I looked at that posibility but there is not enough material to do the machining. The race would push all the way through. I took the rotors to a machine shop and to weld them up and machine them would be about $300!

Bruce, you are telling me they are like gold! I had the poor NAPA man pull about 30 rotors yesterday. None would work.

Where I am now is I bought a wilwood kit for a '69 camaro. I have not mocked it up yet but it still appears that the bearings will be to far apart. But, there is plently of 'meat' in their hub to move the races a bit. Obviously the adaptor for the spindle will not work so a new one will have to be made. If I get this to work I will post all the data for the other owners that have a MGB front suspension.

Any one need a nice set of 4 pot Girling calipers and EBC greenstuff pads? Bolt right on to a MGB spindle!