Not Ranked
Yes, on every cobra I built. I used stainless braided teflon-3 line and full radius fittings. You will notice the improvent in gauge performance immediately, no more unwanted dampening. I no longer have the part number for the adapter fitting for the smith's gauge. The hose shop I use is "TMR" in the city of orange CA. If you call them, they will be able to sell you the setup: fittings, adapters and hose.
TMR Inc
2346 North Pacific Street, Orange, CA 92865
(714) 771-1348
__________________
In a fit of 16 year old genius, I looked down through the carb while cranking it to see if fuel was flowing, and it was. Flowing straight up in a vapor cloud, around my head, on fire.
Last edited by Mr.Fixit; 12-29-2002 at 10:38 PM..
|