[Captain Speed]

I have a 390 bored .060 over with iron heads which have been ported and 2.09/1.66 installed. This comes out to a 401. Intake is the Ford 1964 2/4 with two 600 hollies. Cam is Elgin solid with 245deg. at 50, 324deg adv. and .524 lift. Compression is around 10.2. The engine runs great and is very driveable. My rear gears are 3.07 as most of my driving is on the highway. 70mph is around 2800 rpm. Which is where the power starts to come in. Everyone has a plan of their own, so good luck!!