[zimmy]

Contemporary owners - I have a question.

First let me fill in the missing numbers. My Contemporary is CCX-3-3647 purchased in June 1991. It currently has a 427 Center Oiler with 48 IDA Webers and a Toploader. I will hopefully be doing a new aluminum 427 very soon. 600 HP enigne with hopefully about 500 rear wheel HP.

Now my question. Can any of you send me email pictures of your below the floor pedal setup and more importantly, the slave cylinder mounting and hookup for the clutch. I am particularly interested in the slave cylinder mounting and the clutch fork. I also have a Lakewood bell housing.

On the master cylinder side I am most interested in how you made the hydraulic hookups and from the remote resevoir. I need to redo mine due to some bending and want to do it right this time.

Last area of question. Have any of you beefed up the plate that the under floor pedals/cylinders attach to? My flexes pretty badly and always has. I am thinking of welding a steel or aluminum plate behind the original. Any thoughts or photos would be appreciated.

Thanks to all of you. I look forward to your replies.