I built this engine to put in a Cobra kit car. I have given up on the project because of lack of time. I am trading it back to the company that built it and getting a turn-key car.
The engine is a 289 block bored .030 over. It has been balanced. It has Comp cam #294S. It has solid lifters with a lift of .560. It has Crane 1.73 Roller Rockers. It has 12.5 Keith Black pistons. With the 351C-2V heads it should have a compression ratio of 9.2:1. It has a Holley 780 Double pumper. It comes with a flywheel that is balanced to the crank. You get everything you see in the photo. It still needs a distributor, wires, coil and a few miscellaneous things to fire it up.
Everything in the engine is new except for the block, crank, rods and carb. I have $6200 invested of only the best products and labor.
Email if you have any questions:
j_nassef@hotmail.com
I am asking $3200.
Phone: 909.841.1312
Ask for Joe.