[Ikestaa]

Chris,
That is definitely good to hear.

This afternoon we ran into another problem. It is nothing electrical, but I didn't want to start a new thread. When bleeding the brake and clutch systems we noticed that the hard line feeding into the clutch master has come loose. It doesn't really wiggle around, but brake fluid was dripping out very quickly. This developed about 45 minutes after we had bled the clutch system, and while we were in the process of bleeding the brakes. How is the tube secured into the master? And, is it something that we could fix easily (solder, epoxy ???). Once again, any help would be much appreciated.