Thread: Performer RPM vs. Victor Jr.
View Single Post
  #1 (permalink)  
Old 06-29-2003, 09:16 PM
SSSnake's Avatar
SSSnake SSSnake is offline
CC Member
Visit my Photo Gallery

 
Join Date: Nov 2001
Location: Pittsburgh, PA
Cobra Make, Engine: ERA FIA #2078. 331 stroker, sportsman block built by Evanuik Performance. 450hp
Posts: 256
Send a message via AIM to SSSnake
Not Ranked     
Default Performer RPM vs. Victor Jr.
Just wondering what your opinions are on the victor jr. intake vs. the performer rpm intake. We are currently running the performer rpm with good results, but when i change the intake from dual plane to single plane on desktop dyno it shows a rise in hp from 415 to 450. The loss in torque at 2000 rpm is minimal (301 ft/lbs vs. 320 ft/lbs).

The engine is a 331 stroker with world products 180cc alum. heads, hyd. roller cam .560 lift, 234 duration. holley 650 double pumper with mech. secondaries.

Any advice would be greatly appreciated.

Thanks,
Glenn
Last edited by SSSnake; 06-29-2003 at 09:56 PM..
Reply With Quote