[1cobralover]

With using the vette suspension did you have to get New front wheels. Do to the fact that C4 & C5 have a LOT of back spacing around 6" in some wheels.

As soon as I can get them I will show the jpeg's of the frontend I'm working on. The guys with the welded MG X-member might like it. Its like the Hawk only I'm using a early GM spindle with the same rotor that your using on most of the A/B/U cars

I hope this jpeg works its a photo of the top mount with some machined bushing. These are the mounts Butler sold for his upgraded frontend. You used this mount w/the arms from the MGB shock & trash the rest. I still have to weld the shock mount on it for the coil-over shocks.

Damm wrong computer : (