View Single Post
  #9 (permalink)  
Old 07-24-2003, 11:12 AM
Tinker51 Tinker51 is offline
Club Cobra Member
Visit my Photo Gallery

 
Join Date: Feb 2003
Location: SF East Bay, Ca
Cobra Make, Engine: SPF
Posts: 499
Send a message via AIM to Tinker51
Not Ranked     
Thumbs up A good excuse to buy a new power tool

The chop saw method worked best for me. I made a ton of hoses restoring an airplane so I got pretty good at it. Two wraps of tape, a quick trip through the chop saw, then as previously mentioned clean out the hose. You would be amazed at the amount of gunk that comes out. Someone mentioned a die grinder with a cutoff wheel, my guess is that it would work just as well.
__________________
We have enough youth. What we need is a fountain of common sense
Reply With Quote