[Keithc8]

We can build you a very nice FE engine using a new Genesis block which we do have and a Scat cast steel crank. We are building these in the 482 to 489 cubic inch range. We use Edelbrock heads stage 2 with a Edelbrock performer rpm or Victor JR. We install hydralic rollers and they work great. These engines will make at least 600Hp and 575ft.lbs. tourqe on pump gas and idle at 800 rpm,s. we can do this engine complete from inyake to carb of the dyno. We are also doing the Shelby all alm. crate engines at 17,500.00. Thanks, Keith Craft