[blykins]

Here...let me ask this way....

Anything should work...HEH or RUG... However I should look for....

1. 31 spline output shafts....
2. Of course, well worn parts....
3. Any length will do considering I don't have a drive shaft yet.
4. Any width of case will do... i.e. what Cal was talking about...wide or narrow case.
5. Any diameter input shaft...I would assume a thicker input shaft would take more torque....
6. Look for the ratio of my choice.
7. An 8 or 10 bolt case will work also.

Does this sound right?