[dlowe01]

Was wondering if any one out there that had a desk top dyno could plug my info in and tell me aprox. H.P and Torque figures. If so here is the info: Thanks in advance

351W stroked to 408
Block decked to 9.480 align honed squared
bored .030 over and torqe plated
Scatt Crank 4.0 stroke, rotating assembly balanced
Scatt H beam rods 6.25
Alum. 1.6 roller rockers
World product Alum. heads 2.02x1.6, 64cc chamber and 197cc runner
JE -19cc pistons, 10.1 compression
Comp Cams 240-260 duration 541-544 lift @.050
Canton road race pan girdle and windage tray
Deamon 650 at this time but will probably go to a 750 when funds allow.

Any other info needed??????