[RedBarchetta]

I did a search on this topic and didn't see anything that actually answered my question.

My SPF has the Wilwood brakes with the parking brake pads on the calipers. The parking brake, when fully engaged, will not hold the car on a slight incline (such as my driveway).

Before I start clipping safety wire and removing rear wheels, is there a set procedure that someone can walk me through for tightening the slack on the PB cable? Do I need to remove the wheels, or can this adjustment be done within the cockpit upon removal of the PB lever boot?

Thanks for the inputs and suggestions!

-Deano