[dscott]

All the wiring is going to change. Classic found out about 6 years ago that Packard Bell was not going to produce the connectors anymore. In the usual way they did nothing about it until it was too late. I have been trying to reproduce the old harness with new type connectors but it can't be done. I looked at all the available wiring on the market and decided to use American Autowire. The harness uses the good heat resistant wire and is labled for every function on the wire. So the right tail light wire says "right tail light" the entire length of the wire. I am going to have a few mods done to fit the CR but for now it's a 12 circuit panel. No more all white wires, no more numbers. Should be a nice addition to the car.
Don