01-07-2004, 03:34 AM
|
 |
CC Member
|
|
|
Join Date: Dec 2003
Location: TURKEY-Istanbul,
TR
Cobra Make, Engine: 67 Mustang with Eleanor body kit.408w+250hp NOS with alcohol
Posts: 228
|
|
Not Ranked
Quote:
Originally posted by brainsboy
I had a 71 datsun I built with a 1969 351w block, a 6-71 blower running 10lbs boost, with stock crank and rods, I was running around 565 horsepower, shifting at 7K rpms. 10.71 @ 127mph in the quarter mile. I never had a problem with the bottom end. However most of the people I had spoke to said dont run more then 550hp on the stock parts. I was a little bit in the grey area, but never had a problem with it none the less. I ran it that way for about 6 years. If your under 500hp the stock rods are more then enough, just have them magnafluxed and stress relieved.
|
Main girdle is good for strength the bottom end?
__________________
_________________
ATAY AYDINER...
_________________
ELEANOR
[url]
http://www.clubcobra.com/photopost/s...at=500&thumb=1
http://www.motorspor.com/index.cfm?f...r&haber_id=250
http://fordboss.blogcu.com/1967-must...leanor/5605130
http://www.auto-drom.com/haber-trtuning.htm
http://www.motorspor.com/index.cfm?f...&haber_id=1897
|