Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   429/460 Engine Talk (http://www.clubcobra.com/forums/429-460-engine-talk/)
-   -   520 ford stroker procharged build superformance (http://www.clubcobra.com/forums/429-460-engine-talk/141491-520-ford-stroker-procharged-build-superformance.html)

Dieselpwr 09-24-2018 04:48 PM
520 ford stroker procharged build superformance
 
Hello i am looking for information or pictures of a 429/460 with procharger in a superformance cobra. Just getting ideas while im building mine on how others have mounted the procharger.

I will be useing a f1x procharger probably reverse mounting. I am currently moving the top tower brace forwards for clearance and have gotten rid of the factory radiator shroud and made a much tighter one for more room. Just looking for information from someone who has done it.

cycleguy55 09-25-2018 11:05 AM
Check this thread about a Vortech V7-JT with reverse rotation. It's mounted on a 460 in a West Coast Cobra. Custom mount. http://www.clubcobra.com/forums/429-...ged-460-a.html


More info from http://www.clubcobra.com/forums/all-...tml#post839312 :
  • 435 CID 385 series Ford, 7.88:1 compression.
  • Custom Vortech V7-JT supercharger setup
  • EFI (custom design, built on OEM Ford EEC-IV)
  • Viper 6spd
  • All under-hood, no bubbles, hickeys, etc are required.
  • 500ft-lbs of torque at 2500rpm, 660ft-lbs of torque at 5500rpm, 660hp at 5500rpm. Peak torque occurs at 5600rpm, meaning peak power will be somewhere up around 6500-7000.
  • Above are rear wheel chassis dyno figures and were produced on a dynojet 248 running only 16deg total advance and 11:1 AFR.
  • Probably another 50-100 HP with added spark advance, but all of them are useless... it's already beyond traction limit
Photos here: Project Ludicrous Speed

Dieselpwr 09-25-2018 09:05 PM
Thanks that kind of what i am thinking about doing. i dont mind having a bit larger hood scoop might do one like the super snake. Im building for performance first.

im currently building the engine its a e85 fueled 520 ford, a460 block 9.8 compression, forged crank,bill miller rods, a460 heads fuel injection most likely holley there able to be boost referenced for controling the ignition timing,going to start with 100 hp nos to help get things moving. Hopefully end up with a quick little car


All times are GMT -7. The time now is 09:06 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: