Thread: Progress update
View Single Post
  #13 (permalink)  
Old 02-12-2004, 02:09 AM
boxhead's Avatar
boxhead boxhead is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2002
Location: Alice Springs, central Australia, NT
Cobra Make, Engine: Classic revival kit (CR3181), gen III engine, T56 6 speed box, AU XR8 lsd diff
Posts: 5,699
Send a message via Yahoo to boxhead
Not Ranked     
Default
Mike I have a question regarding your steering rack.

When I mounted my suspension to get everything to where I work, I fitted it all with the standard jag bushes (no 6mm spacer) and I found the lower control arm pivot bolt and nut almost hits the steering rack rod, I suspect I will gain 6mm extra clearance once fitted up with neoprene bushes and the spacer (also I will shorten the bolt and fit nyloc nut)

My question is how close is your pivot bolt nut to the rack?
__________________

Cruising in 5th


---------------------------------------------
Never be afraid to do something new, Remember, Amateurs built the Ark: Professionals built the Titanic.
Reply With Quote