[G.R.]

Steve R
I also have the same type of wiper motor, I think, as Michael
Doesn't both your and Bob P 's drawings etc assume a 5 wire setup?
I have a small lug on the motor that is indeed the hi -speed (I temp-jumpered it to power thats how I knew what it was)yet my motor only has 3 wires to the original toggle switch, on-off, one red wire to ground, other two, yellow and blue, to each side of the switch. Even with the new Lucas wiper switch I have yet to find a lug on the switch that parks the wipers.
It really isn't all that bad to just bump the switch to park the wipers but would be nice if when they were shut down they parked automaticaly.

Also My wipers park to the left--read in the archives that it was because the wheelboxes were mounted backwards --not the case had them both off and reversed them, no way does that work, then swapped left to right, again no way.

Guess I have an oddball Lucas wiper assembly.'