Thread: AU Falcon driveshafts
View Single Post
  #8 (permalink)  
Old 03-03-2004, 05:15 AM
boxhead's Avatar
boxhead boxhead is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2002
Location: Alice Springs, central Australia, NT
Cobra Make, Engine: Classic revival kit (CR3181), gen III engine, T56 6 speed box, AU XR8 lsd diff
Posts: 5,699
Send a message via Yahoo to boxhead
Not Ranked     
Default
Yeah I had to order in the nylocs nuts as well, I ave them and have fitted them up allready but I have only fitted the L/H side at this stage (there are some pics in my gallery) both sides are in but I have only tightened the left side so far.

I have loosened it of and will tighten the R/H side next time in the shed (saturday) to see if something is adrift in the left.

As a side not when I pressed the driveshafts out the R/H came out without looseining the bearing load (no free play) but when the L/H pressed out the bearing must have shifted because I could grab the hub and move it.
__________________

Cruising in 5th


---------------------------------------------
Never be afraid to do something new, Remember, Amateurs built the Ark: Professionals built the Titanic.
Reply With Quote