The clutch kit I ordered included the flywheel with the 28oz imbalance, pressure plate and clutch disk as well as the pilot bearing. Everything is intalled and I drove the car last week around town a few miles or so and there are no strange noises and it seems to be working ok, but there is zero clearance between the throw out bearing and the clutck fingers. If I remove everything and install a shorter pivot stud, that would solve the problem, but I feel that this shouldn't have happened.
http://cgi.ebay.com/ebaymotors/ws/eB...category=33732
this is the exact clutch assembly I bought and installed, except I used a T-5 throw-out bearinh in place of the one shown here
Greg