Thread: Can't Downshift Into 2nd
View Single Post
  #1 (permalink)  
Old 03-18-2004, 07:28 PM
BIG529 BIG529 is offline
CC Member
Visit my Photo Gallery

 
Join Date: Dec 2001
Location: SLIDELL, LA
Cobra Make, Engine: 2000 JOHNEX 427/351
Posts: 23
Not Ranked     
Unhappy Can't Downshift Into 2nd
long story short. clutch slipping, had new clutch put in with a new lakewood bellhousing, ram diaphram clutch with metallic puck disk,tremec 3550,upshifts ok but cannot downshift into 2nd gear(all others ok) until about 5 mph or double clutch.

bellhousing was suppose to be fitted as per jack leg. before change had stock bellhousing and 3 finger clutch (don't know what kind). clutch slipped but all gears were available up and down shifting.

readjusted clutch after 300 miles but did not help.

any help

ken
Last edited by BIG529; 03-18-2004 at 07:43 PM..
Reply With Quote