Maybe you guys can help me with this...
I tried to set up my Accusump to pre
oil a new engine and my valve did not hold the
oil when I tried to pressurize the air end. I followed the directions:
-Depressurize the air end
-Fill 2qt Accusump with 1.5 quarts of
oil
-Install electric valve (not EPC)
-Fill air end with 50PSI of air
At the last step listed.... As soon as the air went in, oil came out on the other side. We tested the valve before hand, we were only able to suck air through one side. Is this normal at first, or do I have a defective valve?
TIA,