Not Ranked
Step 3
Photo #3 shows the machined mounting plate installed into the machined manifold. You can see that the 8 mounting holes used countersunk screws for holding the plate onto the intake manifold. You can also see that we have machined clearances for the accelerator pump adjusting screws.
__________________
Jessica Wysocki, Advertising & Marketing
Inglese Induction Systems
400 S.Orchard St.
Wallingford, Ct 06492-2512
203-265-3617
www.inglese.com
Last edited by Jessica Wysocki; 04-16-2004 at 01:48 PM..
|