Not Ranked
If it feels like a lean stumble: Pull carb, make sure baseplate is snug to main body. Replace carb to intake gasket, and go up one primary jet size.
If you think it's an ignition miss: Inspect cap and rotor, make sure all plug wires are snapped on good on both ends. You didn't accidently pull one of the sparkplug wire's brass terminals off the wire's core when changing plugs perhaps?
__________________
In a fit of 16 year old genius, I looked down through the carb while cranking it to see if fuel was flowing, and it was. Flowing straight up in a vapor cloud, around my head, on fire.
|