Thread: Where to mount MSD box on Kirkham?
View Single Post
  #13 (permalink)  
Old 05-13-2004, 08:11 PM
Rick Parker's Avatar
Rick Parker Rick Parker is offline
CC Member
Visit my Photo Gallery

 
Join Date: May 2001
Location: California, Ca
Cobra Make, Engine: NAF 289 Slabside Early Comp Car with 289 Webers and all the goodies. Cancelling the efforts of several Priuses
Posts: 6,592
Not Ranked     
Default
The threaded stud that is on one side of the rubber isolator has a 10-24 thread on it. You could make a plate of 1/8" aluminum (shorten the studs), drill and tap the plate for the mounting pattern of the MSD box and bond it with structural adhesive to the inside top of the footbox, install the isolators with 242 locktite and install the box, be sure to ground the case. It would be a much more accesable and still be out of sight and no screws heads showing anywhere on the firewall. Downside is there wouldn't be any nuts for the wife to................there I go again.

Rick
__________________
Rick

As you slide down the Banister of Life, may the splinters never be pointing the wrong way
Last edited by Rick Parker; 05-13-2004 at 08:16 PM..
Reply With Quote