Not Ranked
Can someone verify that my MSD setup with the ERA Harness is correct....
1) Connected #43 wires together
2) MSD Heavy red to "BAT" terminal on circuit breaker
3) MSD Heavy Black to chasis ground
4) MSD small red to #40 white
5) MSD small white to #40 orange
6) MSD orange to coil +
7) MSD black to coil -
8) MSG white (kill wire) left unconnected at the moment
I am running the MSD Capacitor between the Heavy Red and Black connections (I see 12.5V at RED)
__________________
"There are 10 types of people out there....the ones that understand binary and the zeros that don't."
|