Thread: Electrical Gremlin
View Single Post
  #7 (permalink)  
Old 10-31-2004, 05:11 PM
joea's Avatar
joea joea is offline
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2002
Location: Oceanside, CA
Cobra Make, Engine: ERA #676, 428SCJ (2x4), TKOII
Posts: 642
Not Ranked     
Default
OK...finally finished putting UCOAT-IT on the garage floor and was able to get back to the Cobra and have a look at this electrical issue...GOOD NEWS>...I located the issue.

The issue is at the large red connector on the harness (with the yellow and red wires). I started it up today after reseating all connections and as it was running I lifted the harness a little at this connection. The engine immediately cut out...as I let go...the engine would pick up and run again. I did this a few times so I am sure the issue is at this connector.

Any suggestions on what to do about it?
__________________




"There are 10 types of people out there....the ones that understand binary and the zeros that don't."
Reply With Quote