[Sizzler]

My part looked like the bottom piece in Mr. Gessford's first picture.
It was slightly shorter at the top due to my hold-down issues (discussed and got produced a set-screw setup).

From the time I got the phone number, including a little phone tag (he worked days), and sending him a check, it took 10 days to get the finished part. Again, it dropped right in and is working fine. $100.

By the way, if anyone actually needs the distributor extension drive for a M/T crossram, he quoted me $175 if I provided the distributor. He'd probably be open to other customizations needed.