[JohnM]

Hello Jerry

Give Joe at A&C a call and ask him if he still has the drawing I sent him (John from Cleveland) about 3 years ago. I can't find a copy in my records. Joe should still have it as he wanted to offer it as an option.

An engineer friend made me a drawing that I sent to Joe who fabricated a nice heavy duty pedal box that is bolted to the top of my foot box. It is slopped to take the angle out of the foot box etc. I hang my wilwood pedal assembly from that and have my 3 master cylinders (hydrulic T/O) comming off it.

The only thing I would change is the the box is welded at all the seams. The wilwood pedal assembly has a balance bar that needs to be adjusted for brake bias. If the top of this pedal box came off with bolts, it would be real easy to adjust the bias. Now I have to find a skinny friend to slide under the dash to do that, as I won't fit.

If I could figure out how to post a photo I would but....Like I say, give joe a call. I could always e-mail you a photo direct.

let me know

John