View Single Post
  #13 (permalink)  
Old 03-13-2005, 09:50 AM
HSSS427's Avatar
HSSS427 HSSS427 is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2004
Location: Alpharetta, GA
Cobra Make, Engine: ERA #414 427 s/o w. Shelby Aluminum heads, Edelbrock Performer RPM Intake, Mighty Demon 750, Tremec TKO 600
Posts: 714
Not Ranked     
Default Thanks for all the great advice

I'll start with the needle and seat cleaning as that's easiest to do. Then I think I'll order and install a pressure regulator as I've had several people say that including a guy who tuned the carb for me. I do have a 1/2" phenolic spacer under the carb and have a turkey pan as well. And next I'll have to see if I can track down some race fuel, but the only place I've seen it is at Road Atlanta which is a good 2 hour round trip.

I'll post the results as I get them.

As usual, ClubCobra comes through as one of the best collaboration and knowledge sharing sites I know of!
Thanks!
Scott
Reply With Quote