...posting this for ClubCobra member, cobraownr
FOR SALE
427/472 Center Oiler Motor
Built August 2004 by John Nafziger/Kustom Kit Kars (NJ)
427 Ford center oiler block
C4AE-6015-A casting number; 3L4 date code
block boiled and pressure tested
oil galleries threaded and enlarged for improved
oil flow
block mains align honed
block decks squared
block bored and honed to 4.281"
PE100R block plug set
Ford 428 crankshaft offset ground to 4.100"
displacement = 472 cu. in.
Clevite camshaft bearing set SH781S
SRP 73F forged pistons and pins
sealed power LR 261 spiro locks
resized D1AE-AA connecting rods
154-6001 ARP rod bolts
R9904-30 Speed Pro moly plasma rings
332 Comp Cams camshaft and lifters
M57HV Melling high volume
oil pump
154-7902 ARP oil pump drive rod
Motor is being sold without heads, intake, oil pan, and distributor.
Motor is located in New Jersey; buyer responsible for all crating
and shipping charges if it is not picked up in person.
Price - $7500.
This motor was built as a short-term replacement for the original motor
in my 427 SC Cobra CSX3047 while that motor was being rebuilt.
However, after seeing how much additional work was needed on the
car, I decided to not try a quick fix and did not install the CO motor.
It has never been fired or run. John Nafziger has built over 100 of these
motors over the years and is available to answer questions at
973-579-1818 (New Jersey).
Please do not waste his time if you are not a serious buyer.
Also feel free to
Contact me by email
or telephone (202-586-1892).
Don