[Buzzmobile]

OK, I am stuck again. I did the removal of the cap and the rotor to see what I had. I was looking at the bushing set up and couldn't decide if what I was looking at is the bushing or not. So I unscrew the lock washer on the under side of the advance assembly. And as I am unscrewing, the thing jumps and dissapears! F***! Ok, I go down and get a new advance kit ...and now I open it up and look. I see the bushings, springs, 2 washers and 2 lock nuts. OK, cool. Well, I don't see how the thing goes back to gether...like where are the threads?! So I take the other side off, now knowing to hold on. Well I get it out, and the lock nut is a much larger than the one in the kit I got. And I still cannot tell what it "screwed" into? I am not seeing it! I know this sounds stupid, but I have never been into this system before and am new at this.

Buzz